What mobile OS are supported
TIMEFLIP2 app is available for Android (7.0+) and iOs (10.0+) operating systems.
Do I need to keep TIMEFLIP2 app open for tracking?
Not at all. TIMEFLIP2 has been designed to operate offline (without connection to the app) for an average of 40 days of tracking. It is enough to open the app to sync, visualize and analyze accumulated data.
How do I pause/resume tracking?
1. Tap on pause/play icon on the app screen, or
2. Double tap directly on the device. The tracker shall signal with LED flashes each time it is paused or restarted.
My TIMEFLIP2 became glitchy, what do I do?
Almost certainly the batteries need to be replaced. Depleting batteries affect Bluetooth connection and the device cannot synchronise properly.
How long do batteries last?
Quality AA alkaline batteries last 6+ months. You can extend battery life by adjusting blink brightness and interval in the Settings. Note, that low quality batteries can leak fluids and damage the device.
Can I put TIMEFLIP2 on auto pause?
Yes, use the "Auto pause" slider in the Settings menu and select desired delay time.
What if I forget to flip the tracker?
You can always edit your time entries inside TIMEFLIP2 app. Short tap on a task name in Tracking menu to open its statistics. Tap on a day bar and then on "time per day" to edit. Please, avoid editing time for an active task as it may generate errors.
How do I update TIMEFLIP2 firmware?
Firmware is updated via Bluetooth. Please check the app Settings for the most recent updates. When updating the firmware, make sure not to touch the device until the process is complete.
My tracking app shows unrealistic time, what should I do?
Your device has not been synched for some time or the last session was unsuccessful. Make sure your device is within the range for Bluetooth connection and restart the app to sync and refresh data.
My app does not respond to pause / tracking button, what should I do?
The connection to your device has been lost. Please, make sure your device is within the range for Bluetooth connection and restart the app – it will reconnect to the tracker.
My phone can't find TIMEFLIP2 at the initial setup, what should I do?
1. Please check if batteries are inserted correctly. In such case, the device shall go through a self test by blinking a sequence of colors as described in the guide.
2. Consider the following sequence: remove TIMEFLIP2 from the list of Bluetooth devices – delete and reinstall the app – turn off/on Bluetooth – open the app and go through initial steps again, making sure that the pairing happens inside the app. Several pairing requests might be needed to bond.
I get "can't connect to someone else's device" message, what should I do?
Upon initial setup TIMEFLIP2 becomes bound to the user's account to prevent from unauthorized connection. Two-level protection includes a password and a PIN key for BLE pairing.
If you have changed your phone, forgot password, or logged with different credentials you will need to hard reset the device by opening it and closing back again.
To move the device from one user to another, tap on "Disconnect TIMEFLIP" in the Settings menu and unbind the device.

TIMEFLIP2 assembly

Did not find the answer?

Ask Us
© 2023 All rights reserved. TimeFlip sp. z o.o.
Have a question? Ask us.
Facebook Messenger